Upper ducting kit for CADEL Atena Plus pellet stove

Upper ducting kit for CADEL Atena Plus pellet stove

The kit proposed here is the optional required to be able to use the upper ducting of the CADEL Atena Plus 12 and 14 ductable pellet stoves. It allows the hot air produced by the stove to be conveyed to a second room , different from the one in which it is installed.

The kit must be inserted into the appropriate slot on the top of the stove and connected to one of the stove’s fans, properly installed by a technician. If you choose to use both upper hot air outlets, you will need to purchase two ducting kits.

This set, when properly installed and insulated, allows you to convey hot air to a second room up to 8 m away.

Under factory settings, 26% of the heat produced by the stove will be released into the room where it is installed, 37% will exit through the right duct, and the remaining 37% will exit through the left duct. To achieve the best performance, an authorized technician will need to balance the power with the air flow.

DIMENSIONS

Diameter: 80 mm.

WARRANTY

The warranty is the official CADEL one and lasts 24 months.